Nagaoka MP-110 / MP-110H MM Cartridge image
  • Nagaoka MP-110 / MP-110H MM Cartridge image
  • Nagaoka MP-110 / MP-110H MM Cartridge image
  • Nagaoka MP-110 / MP-110H MM Cartridge image
  • Nagaoka MP-110 / MP-110H MM Cartridge image
  • Nagaoka MP-110 / MP-110H MM Cartridge image
  • Nagaoka MP-110 / MP-110H MM Cartridge image

Nagaoka MP-110 / MP-110H MM Cartridge

Nagaoka Cartridges

Price: $146.28
No VAT - Subject to Shipping Costs
Choose Variant
MP-110 selected
Quantity
  • In stock - Shipping Status
  • pack1_ local-shipping Created with Sketch.
    Tracked Shipping - Rates to
  • pack1_ lock Created with Sketch.
    Secure payment by Paypal & Stripe

Nagaoka MP-110 / MP-110H  is the newer iteration of the MP-11 and brings a whole new level of well balanced fidelity. The Nagaoka MP-110 / MP-110H cartridge has become world-famous for its outstanding sound performance. The intriguing sound of the Nagaoka MP110 is due to the high production standards present in the entire Nagaoka cartridge program and the superfine polished 0.4 x 0.7 mil elliptical bonded diamond. Tracking and bass impact of this cartridge is extraordinary, no matter which music genre you are listening to. The Nagaoka MP-110 is the cartridge to start with and to keep for a long time.

It is available in two versions 

MP-110 - cartridge only without headshell

MP-110H - cartridge pre-mounted in a Nagaoka Headshell

Please select the desired version before adding it to the shopping basket.

Being a permalloy magnet principle cartridge you can replace the stylus when it is worn for a reasonable cost, and you can even upgrade to the boron cantilever stylus from MP-200 for even clearer high fidelity. 

A Stylus guard is included with the cartridge to protect it during transportation and when not in use. The Stylus guard is also sold separately should you ever find yourself in need of a spare. 

Included in the MP-110 box only are accessories for mounting the cartridge in most headshells. You will find two sets of screws of approximate length 10mm and 13mm as well as two plastic washers and two bolts. Also in the box is a small screw driver.

Because the Nagaoka MP-110 H is premounted on a headshell, no screwdriver and spare screws and bolts are included by Nagaoka as is the case with the MP-110 version without headshell.

Nagaoka
9345

Data sheet

Output voltage
5mV @ 1kHz5cm/sec
Frequency response
20Hz-20kHz
Cantilever
Aluminum alloy
Static compliance
18 x 10-6 cm/dyne
Dynamic compliance
6.0 x 10-6 cm/dyne
Type
Moving permalloy
Channel separation
More than 23dB @ 1kHz
More than 23dB @ 1kHz
Tracking force
1.5 - 2.0 g
Channel balance
More than 1.5dB @ 1kHz
More than 1.5dB @ 1kHz
Cartridge mass
6.5 g
Stylus Type
Superfine polished elliptical bonded diamond with
Load capacitance
47k ohms

You might also like