Shure BC-90 Broadcast Cartridge 1/2 Inch
Shure Cartridges
-
Currently not available.
-
Tracked Shipping - Rates to
-
Secure payment by Paypal & Stripe
New old stock. Cartridge complete with stylus. No extra styli included - only one stylus is supplied with the cartridge.
Shure BC-90 cartridge with Elliptical 0.4X0.7 mil stylus. Please note that this cartridge is for Half Inch mount. If you require a T4P mount please use the BC-80 Broadcast instead.
Shure BC90 is together with Shure BC80 the top of the line in the BC series from the late 80’s. Ruggedness and high-fidelity were the main focus points when Shure produced this series targeting broadcast stations.
Shure BC90 comes with an elliptical stylus and has high-fidelity virtues, due to a flat frequency response and the Masar stylus polish method that was copied from V15 models in order to obtain the best possible sound quality.
The Shure BC70, BC80 and BC90 can all be used for back cuing if wanted.
The Shure BC90 has the ½” mount and comes in an original box. This box contains only one stylus. Since this is a NOS item, the box may show signs of long time storage. The Shure BC90 cartridge is sold as long as stock lasts.
Don’t hesitate to contact our support team if you need help to pick the right cartridge for your needs and preferences.
Data sheet
- Output voltage
- 5.0 mV (1 kHz, 5 cm/sec.)
- Frequency response
- 20Hz - 20kHz
- Cantilever
- Aluminium
- Weight
- 5,5 g
- Vertical tracking angle
- 20°
- Type
- Moving magnet
- Recommended load impedance
- 47,000 ohms
- Vertical Tracking Force
- 1.0 - 1.5g
- Stylus Construction
- Elliptical
- Mounting
- ½” mount
You might also like